Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.1_STABLE (GENERIC) #19: Thu Jan 16 20:08:22 JST 2025 root@kanako.4407.kankyo-u.ac.jp:/usr/src/sys/arch/macppc/compile/obj.macppc/GENERIC total memory = 512 MB avail memory = 480 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated found openpic PIC at 80040000 OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources. bootpath: /pci@f4000000/ethernet@f:0/netbsd mainbus0 (root) cpu0 at mainbus0: 7447A (Revision 1.2), ID 0 (primary) cpu0: HID0 0x84d0c1bc, powersave: 1 cpu0: 1416.67 MHz, 512KB L2 cache no parity memory0 at mainbus0: len=128 spdmem0 at memory0 spdmem0: DDR SDRAM, no parity or ECC, 512MB, 400MHz (PC-3200) spdmem0: 13 rows, 10 cols, 2 ranks, 4 banks/chip, 5.0ns cycle time spdmem0: tAA-tRCD-tRP-tRAS: 2-3-3-8 spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) uni_n0 at mainbus0 address 0xf8000000 hw-clock at uni_n0 not configured ki2c0 at uni_n0 address 0xf8001000 iic0 at ki2c0: I2C bus cereal (cereal) at iic0 addr 0xe0 not configured uninorth0 at mainbus0 pci0 at uninorth0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 11 function 0 pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00) radeonfb0 at pci0 dev 16 function 0: ATI Technologies Radeon 9200 5962 (rev. 0x01) trying to read disabled BIOS... radeonfb0: No video BIOS, using default clocks radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000 radeonfb0: 64 MB aperture at 0x98000000, 64 KB registers at 0x90000000 radeonfb0: display 0: initial virtual resolution 1680x1050 at 8 bpp radeonfb0: using 32 MB per display radeonfb0: port 0: physical 1680x1050 60Hz radeonfb0: port 1: physical 1680x1050 60Hz wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation) wsmux1: connecting to wsdisplay0 drm at radeonfb0 not configured uninorth1 at mainbus0 pci1 at uninorth1 bus 0 pci1: i/o space, memory space enabled pchb1 at pci1 dev 11 function 0 pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) bwi0 at pci1 dev 18 function 0: Broadcom Wireless bwi0: interrupting at irq 52 bwi0: BBP id 0x4306, BBP rev 0x3, BBP pkg 0 bwi0: MAC: rev 5 bwi0: PHY type 2, rev 2, ver 2 bwi0: RF manu 0x17f, type 0x2050, rev 2 bwi0: autoconfiguration error: invalid antenna gain in sprom obio0 at pci1 dev 23 function 0: addr 0x80000000 zsc0 at obio0 irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 snapper0 at obio0 offset 0x10000: irq 30,1,2 pmu0 at obio0 offset 0x16000 irq 47: rev. 85 pmu0: initializing IIC bus iic1 at pmu0: I2C bus admtemp0 at iic1 addr 0x48: MAX6642 temperature sensor: id. 0x4d, rev. 0x4d pmu0: initializing RTC pmu0: power-mgt not configured pmu0: pmu-pwm-fans not configured ki2c1 at obio0 iic2 at ki2c1: I2C bus cereal (cereal) at iic2 addr 0xe0 not configured wdc0 at obio0 offset 0x20000 irq 24, level triggered: DMA transfer atabus0 at wdc0 channel 0 snapper0: software codec audio0 at snapper0: playback, capture, full duplex audio0: slinear_be:16 -> slinear_be:16 2ch 48000Hz, blk 12288 bytes (64ms) for playback audio0: slinear_be:16 <- slinear_be:16 2ch 48000Hz, blk 12288 bytes (64ms) for recording spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) ohci0: autoconfiguration error: memory access is disabled ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) ohci1: autoconfiguration error: memory access is disabled ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) ohci2: interrupting at irq 29 ohci2: OHCI version 1.0, legacy support usb0 at ohci2: USB revision 1.0 ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43) ohci3: interrupting at irq 63 ohci3: OHCI version 1.0 usb1 at ohci3: USB revision 1.0 ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43) ohci4: interrupting at irq 63 ohci4: OHCI version 1.0 usb2 at ohci4: USB revision 1.0 ehci0 at pci1 dev 27 function 2: NEC USB2 Host Controller (rev. 0x04) ehci0: 32-bit DMA ehci0: interrupting at irq 63 ehci0: EHCI version 1.0 ehci0: 2 companion controllers, 3 ports each: ohci3 ohci4 usb3 at ehci0: USB revision 2.0 uninorth2 at mainbus0 pci2 at uninorth2 bus 0 pci2: i/o space, memory space enabled pchb2 at pci2 dev 11 function 0 pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) wdc1 at pci2 dev 13 function 0: interrupting at irq 39 atabus1 at wdc1 channel 0 fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81) fwohci0: interrupting at irq 40 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:11:24:ff:fe:76:dd:a0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset fwohci0: Clear PME# now gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80) gem0: interrupting at irq 41 bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto gem0: Ethernet address 00:11:24:76:dd:a0, 10KB RX fifo, 4KB TX fifo vmmask 737c0000 schedmask 7ffc0000 highmask 7ffc0000 WARNING: system needs entropy for security; see entropy(7) timecounter: Timecounter "mftb" frequency 41620907 Hz quality 100 fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 IPsec: Initialized Security Association Processing. uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered uhub2 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub3: 5 ports with 5 removable, self powered atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 1: cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) wd0 at atabus1 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) cd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA) uhub4 at uhub3 port 2: Genesys Logic (0x05e3) USB2.0 Hub (0x0608), class 9/0, rev 2.00/7.02, addr 2 uhub4: single transaction translator uhub4: 4 ports with 4 removable, self powered uhidev0 at uhub4 port 3 configuration 1 interface 0 uhidev0: PixArt (0x093a) USB Optical Mouse (0x2510), rev 1.10/1.00, addr 3, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir wsmouse0 at ums0 mux 0 uhub5 at uhub4 port 4: Mitsumi Electric (0x05ac) Hub in Apple Extended USB Keyboard (0x1003), class 9/0, rev 1.10/4.10, addr 4 uhub5: 3 ports with 2 removable, bus powered uhidev1 at uhub5 port 3 configuration 1 interface 0 uhidev1: Mitsumi Electric (0x05ac) Apple Extended USB Keyboard (0x020d), rev 1.10/4.10, addr 5, iclass 3/1 ukbd0 at uhidev1: 8 Variable keys, 6 Array codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev2 at uhub5 port 3 configuration 1 interface 1 uhidev2: Mitsumi Electric (0x05ac) Apple Extended USB Keyboard (0x020d), rev 1.10/4.10, addr 5, iclass 3/0 uhidev2: 3 report ids uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0 uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0 swwdog0: software watchdog initialized autoconfiguration error: wdc1:0:0: lost interrupt type: ata tc_bcount: 512 tc_skip: 0 wdc1:0:0: intr with DRQ (st=0x58) wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), xfer f70, retry 0 autoconfiguration error: wdc1:0:0: lost interrupt type: ata tc_bcount: 512 tc_skip: 0 wdc1:0:0: intr with DRQ (st=0x58) wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), xfer f70, retry 1 wdc1:0:0: intr with DRQ (st=0x58) wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), xfer f70, retry 2 wd0: soft error (corrected) xfer f70 WARNING: 5 errors while detecting hardware; check system log. boot device: gem0 root on gem0 nfs_boot: trying DHCP/BOOTP nfs_boot: DHCP next-server: 192.168.111.2 nfs_boot: my_domain=4407.kankyo-u.ac.jp nfs_boot: my_addr=192.168.111.29 nfs_boot: my_mask=255.255.255.0 nfs_boot: gateway=192.168.111.2 nfs server 192.168.111.2:/home/nakaji/macppc: not responding nfs server 192.168.111.2:/home/nakaji/macppc: is alive again root on 192.168.111.2:/home/nakaji/macppc root file system type: nfs kern.module.path=/stand/macppc/10.1/modules entropy: pid 186 (dd) waiting for entropy(7) entropy: best effort wsdisplay0: screen 1 added (fb, vt100 emulation) wsdisplay0: screen 2 added (fb, vt100 emulation) wsdisplay0: screen 3 added (fb, vt100 emulation) wsdisplay0: screen 4 added (fb, vt100 emulation)