erved. NetBSD 10.99.10 (GENERIC) #1: Mon Dec 11 21:32:57 JST 2023 root@st9201.kankyo-u.ac.jp:/home/nakaji/current/obj.cobalt/sys/arch/cobalt/compile/GENERIC Cobalt RaQ 2 total memory = 256 MB avail memory = 246 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated mainbus0 (root) com0 at mainbus0 addr 0x1c800000 level 3: st16650a, 32-byte FIFO com0: console cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0 cpu0: 48 TLB entries, 16MB max page size cpu0: 32KB/32B 2-way set-associative L1 instruction cache cpu0: 32KB/32B 2-way set-associative write-back L1 data cache mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock lcdpanel0 at mainbus0 addr 0x1f000000 gt0 at mainbus0 addr 0x14000000 pci0 at gt0 pci0: i/o space, memory space enabled, rd/line, wr/inv ok pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1 tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1 tlp0: interrupting at level 1 tlp0: Ethernet address 00:10:e0:00:6f:33 lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib0 at pci0 dev 9 function 0 pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39 viaide0 at pci0 dev 9 function 1 viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel interrupting at irq 15 atabus1 at viaide0 channel 1 VIA Technologies VT83C572 USB Controller (USB serial bus, UHCI, revision 0x02) at pci0 dev 9 function 2 not configured tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1 tlp1: interrupting at level 2 tlp1: Ethernet address 00:10:e0:00:6f:32 lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3 lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto timecounter: Timecounter "mips3_cp0_counter" frequency 125000000 Hz quality 100 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 WARNING: system needs entropy for security; see entropy(7) wd0 at atabus0 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) swwdog0: software watchdog initialized boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs kern.module.path=/stand/cobalt/10.99.10/modules entropy: best effort entropy: ready tlp0: receive ring overrun panic: ffs_blkfree_common: freeing free frag: dev = 0x600, block = 7063212, fs = / cpu0: Begin traceback... pid -1983612544 not found cpu0: End traceback... dumping to dev 6,1 offset 525055 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.99.10 (GENERIC) #1: Mon Dec 11 21:32:57 JST 2023 root@st9201.kankyo-u.ac.jp:/home/nakaji/current/obj.cobalt/sys/arch/cobalt/compile/GENERIC Cobalt RaQ 2 total memory = 256 MB avail memory = 246 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated mainbus0 (root) com0 at mainbus0 addr 0x1c800000 level 3: st16650a, 32-byte FIFO com0: console cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0 cpu0: 48 TLB entries, 16MB max page size cpu0: 32KB/32B 2-way set-associative L1 instruction cache cpu0: 32KB/32B 2-way set-associative write-back L1 data cache mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock lcdpanel0 at mainbus0 addr 0x1f000000 gt0 at mainbus0 addr 0x14000000 pci0 at gt0 pci0: i/o space, memory space enabled, rd/line, wr/inv ok pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1 tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1 tlp0: interrupting at level 1 tlp0: Ethernet address 00:10:e0:00:6f:33 lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib0 at pci0 dev 9 function 0 pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39 viaide0 at pci0 dev 9 function 1 viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel interrupting at irq 15 atabus1 at viaide0 channel 1 VIA Technologies VT83C572 USB Controller (USB serial bus, UHCI, revision 0x02) at pci0 dev 9 function 2 not configured tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1 tlp1: interrupting at level 2 tlp1: Ethernet address 00:10:e0:00:6f:32 lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3 lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto timecounter: Timecounter "mips3_cp0_counter" frequency 125000000 Hz quality 100 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 WARNING: system needs entropy for security; see entropy(7) wd0 at atabus0 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) swwdog0: software watchdog initialized boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs kern.module.path=/stand/cobalt/10.99.10/modules entropy: best effort entropy: ready